1 nec's 4-pin sop low off-state leakage current 1-ch optical coupled mos fet ps7200u-1a features ? low off-state leakage current: i loff = 0.1 na typ. ? break down voltage: v l = 80 v ? high-speed turn-on time: t on = 0.05 ms typ ? low output capacitance: c out = 2.3 pf typ. ? c r: c r = 40 pf ? ? 1 channel type: 1a output ? designed for ac/dc switching line changer ? small and thin package: 4-pin sop, height = 2.1 mm ? low offset voltage ? ordering number of taping product: PS7200U-1A-E3, e4, f3, f4 description nec's ps7200u-1a is a low output capacitance solid state relay containing gaas leds on the light emitting side (input side) and mos fets on the output side. it is suitable for high-frequency signal control, due to its extremely low off-state leakage current, low output capacitance, and high-speed turn-on time. california eastern laboratories applications ? measurement equipment the information in this document is subject to change without notice. before using this document, please con? rm that this is the latest version. preliminary data sheet
2 ps7200u-1a package dimensions (unit: mm) 1. led anode 2. led cathode 3. mos fet 4. mos fet 4 3 1 2 top view 4.4 7.00.3 0.50.3 0.15 +0.10 -0.0 5 2.54 4.00.5 0.05 +0.08 -0.0 5 2.05 +0.08 -0.0 5 0.40 +0.10 -0.0 5 0.25 m
3 ps7200u-1a ordering information part number order number solder plating specification packing style ps7200u-1a ps7200u-1a solder magazine case 100 pcs PS7200U-1A-E3 PS7200U-1A-E3 contains lead embossed tape 900 pcs/reel ps7200u-1a-e4 ps7200u-1a-e4 ps7200u-1a-f3 ps7200u-1a-f3 embossed tape 3 500 pcs/reel ps7200u-1a-f4 ps7200u-1a-f4 ps7200u-1a ps7200u-1a-a pb-free magazine case 100 pcs PS7200U-1A-E3 PS7200U-1A-E3-a embossed tape 900 pcs/reel ps7200u-1a-e4 ps7200u-1a-e4-a ps7200u-1a-f3 ps7200u-1a-f3-a embossed tape 3 500 pcs/reel ps7200u-1a-f4 ps7200u-1a-f4-a absolute maximum ratings ( t a = 25oc, unless otherwise specified ) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1 a mos fet break down voltage v l 80 v continuous load current i l 40 ma pulse load current *2 (ac/dc connection) i lp 80 ma power dissipation p d 300 mw isolation voltage *3 bv 1 500 vr.m.s. total power dissipation p t 350 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 40 to +100 c *1 pw = 100 s, duty cycle = 1% *2 pw = 100 ms, 1 shot *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-4 shorted together.
4 ps7200u-1a recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 2 10 20 ma led off voltage v f 0 0.5 v electrical characteristics ( t a = 25oc ) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.3 v reverse current i r v r = 5 v 0.01 5.0 a mos fet off-state leakage current i loff v d = 80 v 0.1 1.0 na output capacitance c out v d = 0 v, f = 1 mhz 2.3 3.5 pf coupled led on-state current i fon i l = 40 ma 2.0 ma on-state resistance r on i f = 5 ma, i l = 40 ma 17 25 turn-on time *1 t on i f = 5 ma, v l = 5 v, r l = 500 , 0.05 0.5 ms turn-off time *1 t off pw 0.5 ms 0.15 0.5 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.3 pf *1 test circuit for switching time r l i f r in pulse input input monitor monitor v o v l t on t of f 10% 90% input 0 output v o = 5 v 50%
5 ps7200u-1a taping specifications ( mm ) PS7200U-1A-E3 ps7200u-1a-e4 ta pe direction outline and dimensions (t ape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0. 1 -0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 900 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 2.0 0.5 11 .9 to 15.4 outer edge of flange 17.51.0 13.51.0 180 +0 -1.5 +1 -0 60
6 ps7200u-1a ps7200u-1a-f3 ps7200u-1a-f4 tape direction outline and dimensions (t ape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0. 1 -0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.0 0.5 11 .9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2
7 ps7200u-1a notes on handling 1. recommended soldering conditions (1) infrared re?ow soldering ? peak re?ow temperature 260 c or below (package surface temperature) ? time of peak re?ow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of re?ows three ? flux rosin ?ux containing small amount of chlorine (the ?ux with a maximum chlorine content of 0.2 wt% is recommended.) (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? flux rosin ?ux containing small amount of chlorine (the ?ux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin ?ux containing small amount of chlorine (the ?ux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) please be sure that the temperature of the package would not be heated over 100 c 220oc package surface t emperature t (oc) t ime (s) (heating) to 10 s to 60 s 260oc max. recommended temperature profile of infrared reflow 12030 s (preheating) 180oc 120oc
8 ps7200u-1a (4) cautions ? fluxes avoid removing the residual ?ux with freon-based and chlorine-based cleaning solvent. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity. life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 04/1 1 /2005
|
